Filter
Top Products
POST Error Messages
POST Message Description
0043 The EISA configuration is not valid for the slot.
Action: Start the System Configuration Utility and check for
conflicts. If the problem recurs, have the system
serviced.
0044 The EISA configuration is not assured!
Action:
If you have just added, removed, or changed the
location of an EISA or an ISA adapter, start the
System Configuration Utility and update the
configuration information. If the problem recurs,
have the system serviced.
If you have not just added, removed, or changed
the location of a device, run the test programs to
identify the failing device. Then have the system
serviced.
0045 The EISA expansion board is not ready in the slot.
Action: Reseat the expansion board. If the problem recurs,
have the system serviced.
0047 The EISA CMOS configuration is not set.
Action:
If you have just added, removed, or changed the
location of an EISA or an ISA adapter, start the
System Configuration Utility and update the
configuration information. If the problem recurs,
have the system serviced.
If you have not just added, removed, or changed
the location of a device, run the test programs to
identify the failing device. Then have the system
serviced.
0048 An error occurred in the EISA checksum.
Action: Turn off the system and wait 30 seconds; then, turn it
back on. If the problem recurs, have the system
serviced.
0049 The EISA NVRAM is invalid.
Action: Turn off the system and wait 30 seconds; then, turn it
back on. If the problem recurs, have the system
serviced.
Chapter 5. Solving Problems 233