Filter
Top Products
Setup Program
6. Press Esc or move the cursor to the Exit option on the menu
bar.
7. Select Exit from the menu bar.
8. Select Exit Saving Changes.
Recording and Restoring Default Settings
If you have a printer attached to your server, you can use the Print
Screen key to print the configuration settings. The default settings
are helpful when you install additional options, or if the system
requires service. Also, record the new settings each time that you
make changes. Be sure to record the current configuration settings
in “Installed Device Records” on page 280. You can restore default
settings by using the Setup program.
To restore default settings:
1. Turn on the server.
2. Press F1 to enter the Setup program.
3. Select Exit from the menu bar.
4. Select Load Setup Defaults.
Chapter 3. Configuring Your Server 43