Filter
Top Products
OS/2 SMP 2.11 Installation
If you have an OS/2 2.11 SMP license and you want to install OS/2
2.1 SMP on your PC Server 704, call IBM and request authorized
program analysis report (APAR) II08627.
In the U.S. and Puerto Rico, call 1-800-992-4777.
In all other countries, contact your IBM reseller or IBM
marketing representative.
You must provide your OS/2 license information. The HelpWare
group will ship you a CD and installation diskettes.
In addition, you must do the following steps:
1. Run the System Configuration Utility program as described in
“Starting the System Configuration Utility Program” on
page 47.
2. Select Step 3: Change Configuration Settings from the menu.
3. Select System Board.
4. Select MP Spec.
5. Verify that the MP Spec version is 1.1. If the version number is
different, change it to 1.1.
6. If your server did not come with ServerGuide, or if you chose
not to use ServerGuide to install your operating system,
continue with the next step. Otherwise, skip the remaining
steps and go to “Device Drivers” on page 36; then, go to
“Installation Checklist” on page 37.
7. Modify a backup copy of OS/2 diskette 1 as follows:
a. If your server came with a RAID adapter installed, do these
steps:
1) Add the appropriate line to the CONFIG.SYS file on
your RAID adapter device-driver diskette. Refer to your
RAID adapter documentation to obtain the required line
for the CONFIG.SYS file.
Chapter 2. Installing Your Software 31