Filter
Top Products
System Configuration Utility
Step 3: Change Configuration Settings
After adding adapters, select this choice to change the configuration,
if necessary. If you change a setting in this step, you might need to
change a switch or jumper setting on the system board or on a
device. See the tables in “Installed Device Records” on page 280 for
a listing of the settings and default values.
All settings will remain in the default position if you do not use this
selection to change the configuration.
If you have set an administrative password and you have not used
the Add and Remove Boards choice during this session, the system
prompts you to enter your password.
Note: If the administrative password entry prompt appears, you
must enter the password to access this selection.
If you have not set an administrative password, the system prompts
you to set one. You can press Esc to continue using the System
Configuration Utility program without setting an administrative
password.
Advanced Options: Press F9 to display the Advanced Options
Menu screen. This screen provides options to display configuration
data. You can select the following choices:
Option Description
Global Resource Map Lists allocated resources.
Board Details Provides details on the adapter highlighted on the
Change Configuration Settings screen.
System Details Displays configuration data on the entire system and
its present state of configuration.
Physical Board ID Lists the identifiers of adapters physically installed in
the system.
Chapter 3. Configuring Your Server 49