Filter
Top Products
Installing Internal Drives
12. If you are installing another 5.25-inch drive, return to step 2 on
page 167. Otherwise, continue with the next step.
13. Reinstall the filler panel frame:
a. Align the hinge tabs at the right edge of the filler panel
frame with the corresponding slots in the chassis.
b. Swing the panel frame to the left until it latches.
14. When you have no more options to install, run the System
Configuration Utility program to specify that the drive is
installed in the system. If your server has a RAID adapter
installed, refer to the RAID adapter documentation for details
about configuration requirements. Record the RAID
configuration information in the appropriate tables in “Installed
Device Records” on page 280.
What to do next?
Installing a hot-swap drive? — Go to “Installing a Drive in a
Hot-Swap Bay” on page 173.
172 PC Server 704 User's Handbook