Filter
Top Products
Installing the Side Covers
3. Align the top and bottom rows of tabs on the cover with the
slots in the chassis; then, carefully push the cover inward.
4. Slide the cover toward the front of the server, so that the tabs
engage firmly in the slots.
5. Attach the three screws 1 that you removed in step 2 on
page 81 to the back edge of the side cover. Tighten the screws
firmly.
6. To prevent unauthorized access inside the server, purchase and
install two padlocks 2, using the loop at the back of each side
cover.
204 PC Server 704 User's Handbook