Filter
Top Products
System Configuration Utility
A screen similar to the following appears when you start the SCU
program.
SYSTEM CONFIGURATION UTILITY, Release x.xx
Step 1: About System Configuration
Step 2: Add and Remove Boards
Step 3: Change Configuration Settings
Step 4: Save Configuration
Step 5: View Switch/Jumper Settings
Step 6: Exit
[Select=ENTER] [Exit=Esc] [Help=F1] [Utilities=F9]
In most cases, the server will operate using the default settings, and
you need to change the settings only to resolve configuration
conflicts or to enable or change device function (for example, define
the drive startup sequence).
Use the following commands to navigate through the screens and
make selections:
Action Press Key
Change between
major menus
← or →
Highlight an item ↑ or ↓
Select an item Enter
End activity
without changing
configuration
Esc
Get help F1
Backing Up the SCU Program Diskette
Use an operating-system command, such as the DOS DISKCOPY
command, to make a complete backup copy of the System
Configuration Utility program diskette. Using the backup copy can
46 PC Server 704 User's Handbook