Filter
Top Products
From the GUI, he:
1. Selects Work areas → Refresh from the Actions pull-down menu on the Tasks
window.
2. Types the following in the Refresh Work Areas window and selects OK:
v 456 in the Work areas field
v robot_control in the Releases field
v 0105 in the Source field
Command
From a command line, he issues the following command:
teamc workarea -refresh 456 -release robot_control -source 0105
Results
TeamConnection notifies Alex of the collision, so his next step is to reconcile the
differences. He follows the same procedure that is described on page 73.
Alex completes the fix record and then tells Carol that he has reconciled the part
differences and that she can now create the driver member. She creates the driver
member without any collisions this time.
Refreshing the driver
Carol is ready to integrate the changes in driver 0105 with the release. Because other
team leads have integrated changes as well, she wants to build her driver with the most
current release part versions. She does one of the following:
GUI
From the GUI, she:
1. Selects Drivers → Refresh from the Actions pull-down menu on the Tasks window.
Figure 35. Refresh Work Areas window
Chapter 6. Working with component and release processes 91