Filter
Top Products
Command
From a command line, he issues the following command:
teamc defect -accept 310 -answer program_defect
Result
The defect goes to the working state.
Creating a work area
Because the component is not following a design, size, and review process, Alex needs
to manually create a work area in which to modify and build his parts. (If the component
follows a design, size, and review process, a work area is automatically created when
the defect moves to the working state, provided that sizing records have been accepted
for the defect.)
Before Alex checks out any parts, he creates a work area that will contain the latest
view of the parts in the release by doing one of the following:
GUI
From the GUI, he:
1. Selects Work areas → Create from the Actions pull-down menu on the Tasks
window.
2. Types 310 in the Work areas field and robot_control in the Releases field and
selects OK..
Figure 6. Accept Defects window
Chapter 5. Working with no component or release processes 53