Filter
Top Products
7. To place the files under source code control, select the Add to Source Code
Control option of the Tools menu.
Starting PowerBuilder:
To create a new project under PowerBuilder, do the following:
1. Start PowerBuilder.
2. Select the Library icon.
Note: If TeamConnection Source Code Control is already installed (the
TeamConnection Settings window will open), you can proceed with Step 5
3. From the Source menu, select Connect. The Connect dialog box will display.
4. Select SCC API from the Connect list box, and then select OK.
5. The TeamConnection Settings window will open. On the TeamConnection
Settings window, enter the family attributes, release, component, and work area.
Then select OK.
Note: The TeamConnection Settings window may redisplay. If this happens,
select OK again.
6. Add parts to the TeamConnection. Select all parts that you want to add to
TeamConnection, including the project folder in the Library window. You can select
all of these objects simultaneously by dragging the mouse pointer while depressing
the Control (CTRL) key.
7. From the Source menu, select Register. This may take some time. These
registered parts should be added to the TeamConnection work area previously
specified in the TeamConnection Settings window
274 User’s Guide