Filter
Top Products
Verifying and testing part updates ................60
Extracting a part .....................62
Checking out the part one more time ..............63
Checking the part back in ..................64
Freezing the work area....................65
Refreshing the work area ...................66
Building the application ...................67
Integrating the work area ...................68
Closing a defect ......................69
Working in concurrent development ................70
Refreshing the work area from the driver ..............71
Integrating the work area ...................72
Reconciling differences....................73
Chapter 6. Working with component and release processes .......77
Moving through design, size, and review ...............78
Changing defect ownership ...................79
Accepting a defect ......................80
Approving the fix.......................81
Checking out a part ......................82
Checking in the changes ....................83
Freezing the work area....................85
Building the application ...................86
Accepting fix records .....................87
Integrating changed parts into a release ...............88
Adding a driver member ...................88
Reconciling the differences ..................89
Returning the work area to the fix state .............89
Reactivating the fix record..................90
Refreshing the work area ..................90
Refreshing the driver ....................91
Building the driver .....................92
Restricting the driver ....................93
Integrating the parts.....................94
Completing the driver ....................95
Testing the built application ..................96
Using a configured process ...................97
Retrieving a past version of a part .................97
This section is for anyone who uses the TeamConnection client to do daily work. The
information is meant for both the person who uses the command line interface and the
person who uses the GUI; instructions for both are provided.
All the tasks in this part are done from a client machine.
Before reading this section, you should be familiar with the TeamConnection
terminology and concepts presented in “Chapter 1. An introduction to TeamConnection”
on page 3.
16 User’s Guide