Filter
Top Products
Note: 310 is the name of the defect that was opened for the problem, so this is
how Alex wants to identify the work area.
Command
From a command line, he issues the following command:
teamc workarea -create -name 310 -release robot_control
Result
TeamConnection creates a work area named 310 associated with release robot_control.
The following parts are currently available in the latest view of release robot_control:
brain.c leg.c
brain.obj leg.obj
brain.exe foot.c
arm.c foot.obj
arm.obj optics.c
hand.c optics.obj
hand.obj
These parts are also visible in the work area 310 because the work area is associated
with the release upon creation, and it contains the latest view of the entire release.
Checking out a part
Alex wants to update a subroutine within optics.c, which controls the aperture of the
robot’s on-board camera. He checks the part out to start the modifications.
Because Alex knows the exact name of the part, he does one of the following:
GUI
Figure 7. Create Work Areas window
54 User’s Guide