CHAPTER 9
Installing the Switch
•
Installing and Connecting an EX3200 or EX4200 Switch on page 117
•
Unpacking an EX3200 or EX4200 Switch on page 118
•
Mounting an EX3200 or EX4200 Switch on page 120
•
Mounting an EX3200 or EX4200 Switch on a Desk or Other Level Surface on page 121
•
MountinganEX3200 orEX4200Switchon TwoPostsin aRackorCabineton page122
•
MountinganEX3200orEX4200SwitchonFourPostsinaRackorCabinetonpage124
•
Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack or
Cabinet on page 128
•
Mounting an EX3200 or EX4200 Switch on a Wallon page 128
Installing and Connecting an EX3200 or EX4200 Switch
TheEX3200 and EX4200 switchchassisis a rigid sheet-metalstructurethathouses the
hardware components.
To install and connect an EX3200 or EX4200 switch:
1. Follow instructions in “Unpacking an EX3200 or EX4200 Switch” on page 118.
2. Mount the switch by following instructions appropriate for your site:
•
“Mounting an EX3200 or EX4200 Switch on Two Posts in a Rack or Cabinet” on
page 122 (using the mounting brackets provided)
•
“Mounting an EX3200 or EX4200 Switch on Four Posts in a Rack or Cabinet” on
page 124 (using the separately orderable four-post rack-mount kit)
•
“Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack or
Cabinet” on page 128 (using the 2-in.-recess front brackets from the separately
orderable four-post rack-mount kit)
•
“Mounting an EX3200 or EX4200 Switch on a Desk or Other Level Surface” on
page 121 (using the rubber feet provided)
•
“Mounting an EX3200 or EX4200 Switch on a Wall” on page 128 (using the
separately orderable wall-mount kit)
117Copyright©2010,Juniper Networks,Inc.