Filter
Top Products
The loader> prompt appears.
3. Set the baud rate:
loader> set baudrate=115200
Press Enter.
4. Press Enter when you see the following message:
Switch baud rate to 115200 bps and press Enter.
The loader> prompt reappears.
5. Save the new serial console speed:
loader> save
Press Enter. The serial console speed is now set to 115200 baud.
6. Boot the software:
loader> boot
The boot process proceeds as normal and ends with a login prompt.
Configuring the Modem
Before you connect the modem, you must configure the modem with required port
settings.
NOTE: ThefollowingprocedureusesHayes-compatible-modemcommandstoconfigure
the modem. If your modem is not Hayes-compatible, see the documentation for your
modem for the equivalent modem commands.
To configure the modem:
1. Connect the modem to the desktop or notebook computer.
2. Power on the modem.
3. From the computer, start your asynchronous terminal emulation application (such
asMicrosoftWindowsHyperTerminal)andselecttheCOMporttowhichthemodem
is connected (for example, COM1).
4. Configure the port settings shown in Table 34 on page 156.
Table 34: Port Settings
ValuePort Settings
115200Bitsper second
8Data bits
NoneParity
Copyright ©2010,Juniper Networks,Inc.156
CompleteHardwareGuide forEX3200 andEX4200 EthernetSwitches