Filter
Top Products
Optical Interface Support in EX3200 and EX4200 Switches
Optional uplink modules for EX3200 and EX4200 switches support SFP, SFP+, or XFP
transceivers. Thistopicdescribes theoptical interfaces supportedforthose transceivers.
It also lists the copper interface supported for the SFP transceivers.
NOTE: Use only optical transceivers and optical connectors purchased from Juniper
Networks for your EX Seriesswitch.
The Gigabit Ethernet SFP,SFP+, or XFP transceivers installed in EX3200 or EX4200
switches support digital optical monitoring (DOM): you can view the diagnostic details
for these transceivers by issuing the operational mode CLI command showinterfaces
diagnosticsoptics. The command does not give any output for coppertransceivers, Fast
Ethernet transceivers, or transceivers not purchased from Juniper Networks.
Thetablesinthistopicdescribetheopticalinterfacesupportoversingle-modefiber-optic
(SMF) and multimode fiber-optic (MMF) cables for SFP,SFP+, and XFP transceivers
and over the copper interface for SFP transceivers:
•
Table18onpage44—OpticalinterfacesupportandcopperinterfacesupportforGigabit
Ethernet SFP transceivers.
•
Table 19 on page 55—Optical interface support for Fast Ethernet SFP transceivers.
•
Table20onpage61—Opticalinterfacesupport forGigabitEthernetSFP+ transceivers.
•
Table 21 on page 66—Optical interface support for Gigabit Ethernet XFP transceivers.
43Copyright©2010,Juniper Networks,Inc.
Chapter3:ComponentSpecifications