In the maintenancemode, the secondline displaysone of the following options that you
can use to configure and troubleshoot the switch:
•
System halt
•
System reboot
•
Load rescue
•
Request VC port (for an EX4200 switch that is a member of a Virtual Chassis)
•
Factory default
•
System EZSetup
LCD Panel Menus
TheLCD panel hasthree menus: Idle, Status, and Maintenance. Togglebetweenthe LCD
panelmenusbypressingtheMenubutton.Navigatethroughthemenuoptionsbypressing
the Enter button.
Table 4 on page 15 describes the LCD panel menu options.
Table 4: LCD Panel Menu Options in EX3200 and EX4200 Switches
DescriptionMenu
In the Idlemenu:
•
Press Enterto cycle throughthe Status LED modes:
•
ADM (administrativestatus)
•
DPX (duplex)
•
PoweroverEthernet (PoE)
•
SPD (speed)
See“NetworkPortLEDs in EX3200 and EX4200 Switches” on page 21 forinformationon the Status LED
modes.
•
Press Menu toexit the Idlemenu and go tothe Status menu.
IDLE
15Copyright©2010, JuniperNetworks, Inc.
Chapter2:ComponentDescriptions