Table 33: Inventory of Components Provided with an EX3200 or EX4200 Switch (continued)
QuantityComponent
1RJ-45cableand RJ-45toDB-9 serial port adapter
1VirtualChassiscable(for an EX4200switch)
2VirtualChassiscableconnector retainers (foran EX4200 switch)
24Dust coversforports (for an EX4200-24Fswitch)
Related Topics Mounting an EX3200 or EX4200 Switch on page 120•
• Installing and Connecting an EX3200 or EX4200 Switch on page 117
• Connecting and Configuring an EX Series Switch (CLI Procedure) on page 165
• Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 167
Mounting an EX3200 or EX4200 Switch
You can mount an EX3200 or EX4200 switch:
•
On two posts in a 19-in. rack or cabinet by using the mounting brackets provided with
the switch.
•
On four posts in a 19-in. rack or cabinet by using the separately orderable four-post
rack-mount kit.
•
In a position recessed 2 in. from the front of a 19-in. rack or cabinet by using the
2-in.-recess front brackets in the separately orderable four-post rack-mount kit. You
can mount the switch in this recessed position on two-post or four-post racks and
cabinets.
•
On a desk or other level surface by using rubber feet. The switch is shipped with four
rubber feet to be used to stabilize the chassis on a desk or other level surface.
•
On a wall by using the separately orderable wall-mount kit.
The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm.) apart so that
the switch can be mounted in any rack or cabinet that provides holes spaced at that
distance.
Related Topics MountinganEX3200 orEX4200Switchon TwoPostsin aRackorCabineton page122•
• Mounting anEX3200orEX4200SwitchonFourPostsinaRackorCabinetonpage124
• Mounting an EX3200 or EX4200 Switch in a Recessed Position in a Rack or Cabinet
on page 128
• Mounting an EX3200 or EX4200 Switch on a Desk or Other Level Surface on page 121
• Mounting an EX3200 or EX4200 Switch on a Wall on page 128
Copyright ©2010,Juniper Networks,Inc.120
CompleteHardwareGuide forEX3200 andEX4200 EthernetSwitches