Table 4: LCD Panel Menu Options in EX3200 and EX4200 Switches (continued)
DescriptionMenu
TheMaintenancemenu hasthe following options toconfigureand troubleshoot the switch:
•
SYSTEM HALT?—Chooseone of the following:
•
Press the Enterbutton tohaltthe switch.Pressthe Enter buttonagainto confirmthe halt.
•
Press the Menu buttonto gotothe next option in the Maintenance menu.
•
SYSTEM REBOOT?—Chooseone of the following:
•
Press the Enterbutton toreboot the switch. Pressthe Enter button againto confirmthe reboot.
•
Press the Menu buttonto gotothe next option in the Maintenance menu.
•
LOADRESCUE?—Chooseone of the following:
•
Press the Enterbutton toroll backthe switchto the rescueconfiguration.Pressthe Enter buttonagain
toconfirm the rollback.
•
Press the Menu buttonto gotothe next option in the Maintenance menu.
•
REQUESTVCPORT?—Chooseone of the following:
•
Pressthe Enterbuttonto configurean uplinkmoduleportor anEX4200-24Fnetworkport tobea Virtual
Chassisport (VCP)or to deletea VCP fromthe switchconfiguration (whenyou delete the VCP,theport
is reset toan uplink module port or an EX4200-24Fnetworkport).
•
Press the Menu buttonto gotothe next option in the Maintenance menu.
•
FACTORYDEFAULT?—Choose one of the following:
•
Press the Enterbutton torestore the switchtothe factory defaultconfiguration. Press the Enter button
againtoconfirm the restoration.
•
Press the Menu buttonto gotothe next option in the Maintenance menu.
•
ENTER EZSETUP?—Chooseone of the following:
•
Press the Enterbutton tolaunchEZSetup. Pressthe Enter button againto confirmthe launch.
NOTE: Youcanuse the ENTER EZSETUP option onlyif the switchis in the factory defaultconfiguration.
ForinformationaboutEZSetup,see“ConnectingandConfiguringanEXSeriesSwitch(J-WebProcedure)”
on page 167.
•
Press the Menu buttonto gotothe next option in the Maintenance menu.
•
EXIT MAINT MENU?—Chooseone of the following:
•
PresstheEnterbuttontoexittheMaintenancemenu.ThenpresstheMenubuttontogototheIdlemenu.
•
Press the Menu buttonto gotothe System Haltoption.
IfyoudonotwantuserstouseMaintenancemenuoptions,disabletheentiremenuorindividualmenuoptions.
SeeConfiguringthe LCDPanelon EX SeriesSwitches (CLIProcedure).
MAINT
(Maintenance
Menu)
Related Topics Front Panel of an EX3200 Switch on page 7•
• Front Panel of an EX4200 Switch on page 9
• Field-Replaceable Units in EX3200 and EX4200 Switches on page 18
• Connecting and Configuring an EX Series Switch (CLI Procedure) on page 165
• Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 167
17Copyright©2010,Juniper Networks,Inc.
Chapter2:ComponentDescriptions