Filter
Top Products
magicolor 330 - Base Engine Service Manual 5-5
Primary Fault Isolation Procedures
5.1 - Light (Undertoned) Prints, continued
Step Actions and Questions Yes No
6
FUSER INSPECTION
Inspect the image on the sheet of paper after
it exits the Fuser Rolls.
Is the image light when it exits the Fuser?
Go to step 7
7
1. Replace the Oil Roll Assembly (RRP 9.82).
2. Generate a dozen test print.
3. Inspect the image on the last sheet out.
Is the image density now normal as it exits the Fuser?
Problem
Solved
Replace the
Pressure Roll
(RRP 9.83) and
the Heat Roll
(RRP 9.84)