Filter
Top Products
magicolor 330 - Base Engine Service Manual 5-33
Primary Fault Isolation Procedures
5.15 - Unfused Image or Image Easily Rubs Off of Page
PROBLEM
The toner image is not completely fused to the paper. The image easily rubs off.
THE
PRINTER DISPLAYS NO ERROR MESSAGE.
• Main Fuser Assembly (RRP 9.81)
Step Actions and Questions Yes No
1
IMAGE INSPECTION
Is the image density very light?
Go to FIP 5.1
Light (Under-
toned) Prints
Go to step 2
2
Replace the Temperature Sensor Assembly (RRP 9.88)
Is the image correctly fused?
Problem solved Go to step 3
3
Replace the LVPS (RRP 9.119)
Is the image correctly fused?
Problem solved Go to step 4
4
Replace the MCU PWB (RRP 9.123)
Is the image correctly fused?
Problem solved Replace the
Pressure Roll
Heat Rod (RRP
9.85) and the
Heat Roll Heat
Rod (RRP
9.86)
RS514X