Filter
Top Products
magicolor 330 - Base Engine Service Manual 9-201
Removal and Replacement Procedures
RRP 9.98 Upper Guide Assembly (PL9.2.32)
Removal
1. Remove the Oil Roll Assembly (RRP 9.82).
2. Raise the Upper Guide Assembly and remove the pivot arms in the Assembly from the cutouts in the
Fuser frame.
Replacement
1. Position the Upper Guide Assembly as shown in the figure and insert the front and rear pivot arms into
the cutouts in the Fuser frame.
2. Close the Upper Guide Assembly.
3. Reinstall the Oil Roll Assembly (RRP 9.82).