Filter
Top Products
3-32 magicolor 330 - Base Engine Service Manual
Primary FIPS: Error Messages
3.29 - Error Message: Magenta Toner Missing
The Magenta Toner Cartridge is either not installed or not installed correctly.
Logic control on the MCU PWB did not receive a signal from the Cartridge Sensor when the Rotary Frame moved
the Magenta Developer Housing into position.
Step Actions and Questions Yes No
SUSPECT COMPONENTS
The following components are associated with this specific prob-
lem. One or more of these components may have failed partially or
completely. If you cannot isolate the problem using this FIP,
replace each component listed below, one at a time, until the prob-
lem disappears.
• Wiring and connectors linking the components
• Rotary Frame Assembly (RRP 9.67)
1
MAGENTA TONER CARTRIDGE RESEAT
1. Remove the Magenta Toner Cartridge.
2. Reinstall the Magenta Toner Cartridge.
Does the error message still appear?
Go to step 2 Treat as an
intermittent
problem.
2
Replace the Magenta Toner Cartridge (RRP 9.56)
Does the error message still appear?
Go to step 3 Problem
solved
3
Replace the Toner Cartridge Sensor (RRP 9.69)
Does the error message still appear?
Go to step 4 Problem
solved
4
Replace the MCU PWB (RRP 9.123)
Does the error message still appear?
Go to suspect
components
Problem
solved