Filter
Top Products
magicolor 330 - Base Engine Service Manual 9-77
Removal and Replacement Procedures
RRP 9.36 Main Paper Handling Assembly (PL5.1.1)
Removal
1. Remove the MSI Assembly (RRP 9.22).
2. Slide the Main Paper Handling Assembly far enough out of the printer so you can reach the Assembly
Rails.
3. Push in on the Front Rail latch as you slide the front of the Assembly out far enough to disengage the
latch.
4. Push in on the Rear Rail latch as you slide the rear of the Assembly out far enough to disengage the
latch.
5. Slide the Main Paper Handling Assembly out of the printer.
Replacement
1. Position the Main Paper Handling Assembly so the Front and Rear Rails on the Assembly line up with
the Front and Rear Rails of the printer frame.
2. Push in on the Rear Rail latch as you slide the rear of the Assembly into the printer far enough so the
latch engages.
3. Push in on the Front Rail latch as you slide the rear of the Assembly into the printer far enough so the
latch engages.
4. Slide the Main Paper Handling Assembly all the way into the printer and then out again to make sure
the Assembly slides smoothly.
5. Reinstall the MSI Assembly (RRP 9.22).