Filter
Top Products
magicolor 330 - Base Engine Service Manual 9-113
Removal and Replacement Procedures
RRP 9.54 Toner Box Sensor (PL6.1.43)
Removal
1. Remove the XL Rail Assembly (RRP 9.52).
2. Squeeze the four Sensor latch arms as you push the Toner Box Sensor free from the XL Rail Assem-
bly.
3. Disconnect P/J 83 from the Sensor.
Replacement
1. Position the Toner Box Sensor on the XL Rail Assembly so the P/J faces away from the Erase Lamp
Assembly and the Toner Box Sensor Actuator points up.
2. Press the four Sensor latch arms into the cutouts in the XL Rail Assembly.
The Sensor snaps into place.
3. Reconnect P/J 83 to the Sensor.
4. Reinstall the XL Rail Assembly (RRP 9.52).