Filter
Top Products
magicolor 330 - Base Engine Service Manual 9-163
Removal and Replacement Procedures
RRP 9.79 TR0 Sensor (PL8.2.12)
Removal
1. Remove the Transfer Assembly (RRP 9.71).
2. Disconnect the P/J from the TR0 Sensor.
3. Remove the screw securing the TR0 Sensor to the IBT frame and remove the Sensor.
Replacement
1. Insert the LEDs of the TR0 Sensor through the slot in the IBT frame.
2. Use one screw to secure the TR0 Sensor to the IBT frame.
3. Reconnect the P/J to the TR0 Sensor.
4. Reinstall the Transfer Assembly (RRP 9.71).