Filter
Top Products
magicolor 330 - Base Engine Service Manual 9-145
Removal and Replacement Procedures
RRP 9.70 Used Cartridge Sensor (PL7.2.30)
Removal
1. Remove the Top Cover (RRP 9.3).
2. Remove the screw securing the Used Cartridge Sensor Plate to the printer frame and remove the
Plate.
3. Disconnect P/J 88 from the Used Cartridge Sensor.
4. Remove the screw securing the Used Cartridge Sensor to the Used Cartridge Sensor Plate and
remove the Sensor.
Replacement
1. Position the Used Cartridge Sensor on the Sensor Plate so the screw holes line up.
2. Use one screw to secure the Sensor to the Plate.
3. Reconnect P/J 88 to the Used Cartridge Sensor.
4. Reinstall the Used Cartridge Sensor Plate to the printer frame and use one screw to secure the Plate.
5. Reinstall the Top Cover (RRP 9.3).