Filter
Top Products
magicolor 330 - Base Engine Service Manual 9-119
Removal and Replacement Procedures
RRP 9.57 Cyan (C) Toner Cartridge (PL7.1.3)
Removal
1. Open the Front Cover.
2. Push up and hold the Rotary Latch Lever that is located above and to the left of the Rotary Knob.
3. Turn the Rotary Knob in the direction of the arrows printed on the Knob.
4. Stop turning the Knob when the Cyan Toner Cartridge is lined up within the cutout just below the
Rotary Knob.
The end of the Cyan Toner Cartridge is cyan, as is the end of the Cyan Developer Housing the Car-
tridge fits into.
5. Release the Rotary Latch Lever.
6. Turn the Cyan Toner Cartridge handle counterclockwise until it stops.
7. Pull the Cyan Toner Cartridge out of the printer.
8. If you are replacing an old Cyan Toner Cartridge with a new one, dispose of the old Cartridge accord-
ing to the instructions presented in the Renoir User Manual.
Replacement
1. If you are replacing an old Cyan Toner Cartridge with a new one, prepare the new Cartridge according
to the instructions presented in the Renoir User Manual.
2. Open the Front Cover.
3. Push up and hold the Rotary Latch Lever that is located above and to the left of the Rotary Knob.
4. Turn the Rotary Knob in the direction of the arrows printed on the Knob.
5. Stop turning the Knob when the Cyan Developer Housing is lined up within the cutout just below the
Rotary Knob.
The end of the Cyan Developer Housing is cyan.
6. Release the Rotary Latch Lever.
7. Position the Cyan Toner Cartridge so the printed arrow is on the top of the Cartridge and is facing the
printer.
8. Slide the Cartridge as far as it will go into the printer.
9. Turn the Cyan Toner Cartridge handle clockwise until it stops.
The Cyan Toner Cartridge is now locked in place.
10. Close the Front Cover.