Filter
Top Products
magicolor 330 - Base Engine Service Manual 9-239
Removal and Replacement Procedures
RRP 9.117 Developer Clutch Assembly (PL11.1.23)
Removal
1. Remove the Rotary Motor PWB (RRP 9.115).
2. Disconnect P/J 56 from the Developer Clutch.
3. Remove the Fuser Drive Assembly (RRP 9.110).
4. Remove the four screws securing the Developer Clutch to the printer frame and remove the Clutch.
Replacement
1. Position the Developer Clutch Assembly so the wires are at the top of the Clutch.
2. Align the positioning keys on the Clutch with the cutouts in the frame and press the Clutch against the
frame.
3. Line up the four screw holes in the Clutch with the four screw holes in the frame.
4. Use four screws to secure the Developer Clutch Assembly to the printer frame.
5. Reinstall the Fuser Drive Assembly (RRP 9.110).
6. Reconnect P/J 56 to the Developer Clutch.
7. Reinstall the Rotary Motor PWB (RRP 9.115).