Filter
Top Products
99
Setup for TCP/IP
(Windows NT/Windows 2000)
6
6.2 Setup for the Printer
6.2.2 Other Settings
If necessary, set the following settings on the printer. However, the factory setting of
these items do not need to be changed for normal use.
"Chapter 13 Configuring by the Tools Mode Screen" for details on the printer setting
items.
• Print Mode (Factory setting: PCL*)
• PJL Switch (Factory setting: On)
• LPD Spool (Factory setting: Hard Disk spool)
* If the optional PostScript software kit is installed, factory setting will be Auto.