Filter
Top Products
27
Setup
2
2.1.2 Ethernet
The Ethernet interface supports the following types of cable:
• 100Base-TX (Twisted Pair Cable)
• 10Base-T (Twisted Pair Cable)
The Ethernet interface cannot be installed together with the Token Ring interface.
The procedure for connecting to the Ethernet interface is as follows:
Switch off the power supply of the printer.
Connect the interface cable to the Ethernet
interface connector.
Use an interface cable that is suitable for
your network connection.
Switch on the printer.
When the printer is connected to a 100Base-TX/10Base-T connector, and you want to fix
the transmission speed of either connector, or you want to specify printer settings for the
environment used, refer to "Chapter 13 Configuring by the Tools Mode Screen" for details.
2.1 Connecting Interface Cables