Filter
Top Products
Setup for Windows Networking
103
7
7.1.2 Setup Procedure
Follow the procedure below to setup the printer for the Windows Networking environment.
Procedure
Setup the port status and transport protocol at the printer.
• When using NetBEUI
From the touch panel display, select Enable for the port status of SMB
(factory setting: Enable), followed by On for NetBEUI (factory setting: On).
"7.2 Setting NetBEUI in Printer"
• When using TCP/IP
From the touch panel display, select Enable for the port status of SMB (factory
setting: Enable), followed by On for TCP/IP (factory setting: On).
"7.3 Setting TCP/IP in Printer"
Change the printer and workgroup name.
If necessary, change the SMB setting file, "config.txt" as well as the printer and
workgroup name from the host computer.
"7.4 Changing Printer and Workgroup Name"
Install the printer driver to the host computer.
"7.5 Auto Driver Downloading"
7.1 Introduction