Filter
Top Products
22
1
1.8 Power Saver
1.8.1 Using the Power Saver Mode
Power saver is a feature to help reduce the power consumption of the machine to save
power.
Procedure
Press the "Power Saver (On/Off)" button on the control panel.
The display will become completely black and the "Power Saver (On/Off)" button
will be lit.
Depending on the state of the printer, both the "Communicating" and "Job in
Memory" indicators may be lit.
To disable the power saver mode, press the lit "Power Saver (On/Off)" button.
The "Power Saver (On/Off)" button will be unlit and the Power Saver mode is off.
When the machine receives a print job, it will automatically exit the Power
Saver mode.
1.8.2 Automatic Power Saver Mode
Even when the "Power Saver (On/Off)" button is not pressed, the machine will
automatically switch to a waiting mode if it is left switched on without being used for a
certain period of time. This is called the Auto Power Saver mode which consists of the
following two modes:
• Low Power Mode: the state where the temperature of the heater is lowered.
• Sleep Mode: the state where the power of the heater is off and power can be saved most.
The machine will automatically enter the Low Power Mode after a certain period of time
and then switch to the Sleep mode after another lapse of time. During these two modes,
the display will become completely black and the Power Saver (On/Off) button lit.
Once the lit "Power Saver (On/Off)" button is pressed, it will become unlit and the power
saver mode will be disabled.
For details on setting the Power Saver and preventing the Power Save mode to enter Sleep
Mode, refer to Time-Out and System Setup of "13.2.1 Common Settings".
For the DP-6000/7000 without the printer installed, the Power Saver mode is different. For
details, refer to "1.5 Saving Power" and "6.1 List of Custom Preset Functions " of the
Operating Instructions (For Copier).