Filter
Top Products
63
4.3 Configuring the Printer Drivers
Installing/Configuring the Printer Drivers
4
First Sheet
Enables you to select for the first sheet of your document, a paper source different from the
rest of the output sheets as selected in Paper Source on the "Paper/Output" tab. Note that
the paper size used for this different paper source must be the same as the rest of the
document. Options include:
None
The first sheet will use the same paper source as the rest.
Different Paper Source
Specify the paper source for the first sheet:
• Auto (default)
• Tray 1
• Tray 2
• Tray 3
• Tray 4
• Tray 5 (Bypass)
• Tray 6 (High Capacity)
EMF Spooling (for Windows NT 4.0/Windows 2000) (default: off)
Specifies the format in which to store printing information on your disk while a job is
waiting to be printed. Turning this control on will enable the EMF disk file format.
Otherwise, RAW format will be used. Enabled if Vector is selected for Graphics Mode on
the "Graphics" tab.
Restore Defaults
Restore the settings in the dialog box to their default values.