Filter
Top Products
49
4.2 Installing/Uninstalling the Printer Drivers
Installing/Configuring the Printer Drivers
4
4.2.3 Uninstalling the Printer Drivers
• For drivers installed by the "Setup.exe" program, use the "Unsetup.exe" program to
uninstall.
• For Windows 95/98/Me alternate drivers installed in Windows NT/Windows 2000 server
(workstation), use the "Unsetup.exe" program to uninstall the Windows 95/98/Me drivers
and then activate the "Unsetup.exe" program of the Windows NT/Windows 2000 driver.
• To uninstall the alternate drivers downloaded using the "Add Printer Wizard" dialog box
at the client computer, open the "Printers" window and erase the applicable printer
icons.
Procedure
Click Start and select Run.
In the "Run" dialog box displayed, click Browse.
In this example, we will uninstall the PCL 6 driver on the Windows 98 OS.
Insert in the "PCL Driver/Network Utility (Windows)" CD-ROM and select the
CD-ROM drive in the "Browse" dialog box.
Next, select (Driver_PCL6\Win9x_Me\Setup) Unsetup.exe from the CD-ROM
and click Open to close the "Browse" dialog box.
When uninstalling any driver, remember to use the "Unsetup.exe" program of
the correct driver and of the same version as the "Setup.exe" program used for
installation.
The path for the unsetup program appears in the "Run" dialog box.
Click OK to continue.
The following "Printer Uninstall" dialog box appears.
Check the printer model and then click Next.
The following "Ready to Start Deleting" dialog box appears.