Filter
Top Products
144
10
This section describes the configurations to be done at the printer.
10.3.1 Activating Internet Service
Activate Internet Service on the touch panel display by the following procedure.
If the IP address has not been defined, follow the message displayed to define it after
the Internet Service is activated.
Procedure
Press the Settings/Meter Check button on the control panel and select Tools
Mode on the screen displayed.
Enter the access number of the system administrator by using the numeric
keypad and touch Confirm.
The factory setting of the access number is "11111".
Select Print/Scan Mode Settings.
10.3 Configuring Printer