Filter
Top Products
164
12.1 Types of Report/List
Printing Content Remarks
PJL Syntax Error Cause: A PJL command syntax error has occurred.
Treatment: Check the printer settings or correct the PJL command.
Print LANG Not Installed Cause: An uninstalled printer language is specified.
Treatment: Look at the Printer Settings List to check if the
specified printer language is installed.
Scan Data Repository ERR Cause: DNS is not set or DNS address is not correctly set.
Treatment: Check whether the DNS address is correctly set. Or
use the IP address to set the scan data repository address.
Invalid IP Address-DHCP Cause: The IP address set at DHCP is no more effective.
Expired Treatment: Check the DHCP environment or set the IP address at
the printer.
Out of PCL Memory Cause: As the printer is out of PCL memory, printing cannot be
processed.
Treatment: Increase the PCL memory setting.
PCL Command Error Cause: A PCL command error has occurred.
Treatment: Check the print data.
Max. User Number Exceeded
Cause: It is detected that the user number for Security Print and
Sample Set documents has exceeded 200 (maximum).
Treatment: Delete documents or users that are no more in use, and
then print again.
Template Syntax ERR Cause: A job template syntax error for scanning is detected.
Treatment: Specify other correct job template or recreate another
job template.
PostScript LANG Interpret Cause: A PostScript error has occurred.
ERR Treatment: Check the print data.
PCL Memory Low, Page Cause: Lossy compression. Job is very complex, display list
Simplified takes up too much memory, decomposer will perform lossy
compression. Job can still be printed but image cannot be
guaranteed.
Treatment: Increase the PCL memory and print again.
The result of the printing is shown on the next page.