Panasonic DA-PC700 All in One Printer User Manual


 
200
11
13.12 System/Meter Settings
14.2 On Using NetWare
This section explains the precautions and limitations of using this printer with NetWare.
14.2.1 Setting Printer
If there is not enough memory after the port status is set to Enable, the display might display a
message of the insufficient memory and the port status might be set to Disable automatically.
When this happens, either set the port status of ports not in use to Disable or change the
memory size, increasing the memory.
Take note of the following limitations on the names:
Item Limitation
Device Name Use only half-width alphanumeric characters.
Cannot use mathematical symbol (+ =), dot (.), backslash (\), tilde
(~).
There is no difference between underscore(_) and space( ).
1
There is no difference between the capital and small letters of half-
width alphanumeric characters.
Tree Use only half-width alphanumeric characters.
Cannot use mathematical symbol (+ =), dot (.), backslash (\), tilde
(~).
There is no difference between underscore(_) and space( ).
There is no difference between the capital and small letters of half-
width alphanumeric characters.
File Server Name Use only half-width alphanumeric characters.
Cannot use mathematical symbol (+ =), dot (.), backslash (\), tilde
(~).
There is no difference between underscore(_) and space( ).
1
There is no difference between the capital and small letters of half-
width alphanumeric characters.
Context Use only half-width alphanumeric characters.
Cannot use mathematical symbol (+ =), dot (.), backslash (\), tilde
(~).
There is no difference between underscore(_) and space( ).
2
There is no difference between the capital and small letters of half-
width alphanumeric characters.
Print Server Name Use only half-width alphanumeric characters.
Cannot use mathematical symbol (+ =), dot (.), backslash (\), tilde
(~).
There is no difference between underscore(_) and space( ).
1
There is no difference between the capital and small letters of half-
width alphanumeric characters.
1: The following characters cannot be used in the present Netware file server when it is operating in
bindery mode but in order to standardize the directory service and the limitations, there is no
limitation at the printer without taking into consideration the type of operating mode:
semicolon(;), colon (:), asterisk (*), question mark(?) , comma (,), double quotation ("),
greater than/less than symbol (<>), bracket ([ ]), pipe (| )
2: Mathematical symbol (=) and dot (.) cannot be used as context and can be only used as delimiters.