Filter
Top Products
191
Configuring by the Tools Mode Screen
13
Menu Item Description
Port Settings > • Print Mode
LPD (con't...) Sets the print mode.
Available option: Auto*, PCL, PostScript.
• PJL Switch
Sets the PJL commands sent from the host device to valid or invalid.
Available options: Off, On*.
• TBCP Filter
Define the setting of the TBCP Filter when the optional PostScript software kit
is installed.
Available options: Disable, Enable*.
• Connection Time-Out
Define the time-out.
Available options: 2 - 3,600 sec (16 sec*).
Port Settings > Items:
EtherTalk • Port Status
Define the setting of the EtherTalk port when the power is on.
Available options: Disable*, Enable.
The note items at the end of this tabulation of print/mode settings.
• Print Mode
Sets the print mode.
Available option: PostScript*.
• PJL Switch
Sets the PJL commands sent from the host device to valid or invalid.
Available options: Off, On*.
Port Settings > Item:
Salutation • Port Status
Sets the salutation port when using the network scanner driver and the mailbox
viewer.
Available options: Disable*, Enable.
This port uses the salutation protocol meant for the
communication between the Panasonic network scanner driver
and the mailbox viewer. It is not guaranteed to work when
connected to any other salutation protocol.
Port Settings > Item:
FTP Client • Port Status
Sets the FTP Client port.
Available options: Disable*, Enable.
Port Settings > Item:
Internet Service • Port Status
Define the setting of the Internet Service port when using Internet Service.
Available options: Disable, Enable*.
The note items at the end of this tabulation of print/mode settings.
13.2 System/Meter Settings
* factory setting