Filter
Top Products
183
Configuring by the Tools Mode Screen
13
13.1 Tools Mode
When you want to change the setting of any item of the copier and printer/
scanner, select Copy Mode Settings and Print/Scan Mode Settings
respectively.
Here, we select Print/Scan Mode Settings as an example.
Select the required item.
13.1.2 Exiting the Tools Mode Screen
You can return to the default screen by the following procedure after you have se-
lected the required features.
If "System Administration Mode Exit Timer" default is defined in Time-outs, the machine
will exit the mode once the set time has elapsed and the default screen will be displayed.
The factory setting is 10 minutes.
Procedure
Select Exit Tools on the Tools Mode screen.