Filter
Top Products
186
10
Menu Item Description
System Setup (con't...) • Print Mode: Paper Switch
Sets whether or not to print when there is no paper in the machine that matches
the selected paper size for the print job.
Available options: Cancel Job, Use Bigger Size*.
If Cancel Job is selected, the machine will cancel the print job. If Use Bigger
Size is selected, the machine will select the next bigger paper size.
• Print: Single-page Job Output
Sets how a print job with single-page output is to be delivered.
Available options: Face Up, Face Down*.
• Print Mode: Printable Area
Select whether to create the output image on the standard area (area excluding
a 4 mm width from all sides of the paper) or extended area (area excluding a 2
mm width from all sides of the paper).
Available options: Standard*, Extended.
• Scan Mode: Edge Erase
Sets the width of the edges from all four sides of the paper when scanning.
Available options: Top & Bottom Edges (0* - 50 mm),
Left & Right Edges (0* - 50 mm).
• Output to Finisher
Select whether to enable or disable copies from being delivered to the Finisher
when the paper size has been changed to a larger one in the middle of a print
job.
Available options: Enable, Disable*.
Change of Access Number See step 5 to 6 of the procedure of "Changing the access number of the
administrator" of "6.3 Configuring the Machine by using Tools Mode" of the
Operating Instructions (For Copier).
13.2.2 Copy Mode Settings
Menu Item Description
Screen Layout See "Screen Layout" of "6.1 List of Custom Preset Functions" of the Operating
Instructions (For Copier).
Feature Defaults See "Feature Defaults" of "6.1 List of Custom Preset Functions" of the Operating
Instructions (For Copier).
Image Quality See "Image Quality" of "6.1 List of Custom Preset Functions" of the Operating
Instructions (For Copier).
Original Size Defaults See "Original Size Defaults" of "6.1 List of Custom Preset Functions" of the
Operating Instructions (For Copier).
R/E Presets See "R/E Presets" of "6.1 List of Custom Preset Functions" of the Operating
Instructions (For Copier).
13.2 System/Meter Settings
* factory setting