Filter
Top Products
135
Using the Internet Printing Protocol
9
After the printer protocol setup is done, carry out the following procedure on the computer.
• Before installing the printer driver on the client computer, check that Internet Protocol (TCP/IP) has
been installed. If it has not been installed, refer to the Windows 2000 manual to install it.
• When using the internet printing via the proxy server, an error message, "Cannot be connected to the
internet" may appear when setting the printer. When this happens, change the setting of the IP address
without going through the proxy server by selecting Printer, Settings, Control Panel, and then Internet
Options. For details on the setup method, refer to the Windows 2000 manual.
9.2.1 For Windows 2000
Procedure
Click Start, and then select Settings, followed by Printers.
The Printers window appears.
Double click Add Printer.
The Add Printer Wizard dialog box appears.
Click Next.
9.2 Setup of the Printer and
Installing the Printer Driver