Filter
Top Products
4–Installation in a Linux Environment
Installing Software
4-12 FE0254601-00 A
7. Under Drivers, click the download link for FC-FCoE DD-Kit (Figure 4-8).
Figure 4-8. Download the FC-FCoE DD-Kit
8. Read the QLogic license agreement, and then click Agree.
9. When prompted, click Save to save the driver file to the hard drive. The
compressed file contains the source for the QLogic FC-FCoE driver. The file
name has the following format:
qla2xxx-src-x.xx.xx.xx.xx.xx-k.tar.gz
10. When prompted, click Save to save the DD-Kit file to a temporary location
on the hard drive. The compressed file contains the driver binaries in ISO
image format. The file name has the following format:
qla2xxx- x.xx.xx.xx.xx.xx-k-<architecture>-dd-2.6.18-128.iso.gz
11. Unzip the DD-Kit file to obtain the ISO image by typing the following
command:
# gunzip qla2xxx- x.xx.xx.xx.xx.xx-k-<architecture>-dd-
2.6.18-128.iso.gz
12. Transfer the ISO image to a CD-ROM using an ISO CD-burner software, or
type the following command:
# dd if=/<directory with iso image>/ qla2xxx-
x.xx.xx.xx.xx.xx-k-<architecture>-dd-2.6.18-128.iso
of=/dev/fd0
The resulting CD-ROM becomes the driver disk.
13. Insert the RHEL 5.3 CD/DVD into the server optical drive.