Filter
Top Products
8–Configuring FCoE in a Linux Environment
Boot-from-SAN
FE0254601-00 A 8-39
n. Enable both Selective Login and Selective LUN Logins
(Figure 8-16). Enabling Selective Logins restricts the discovery of
targets to what is specified in the database as a boot device. Enabling
Selective LUN Logins restricts the discovery of LUNs to what is
specified in the database as a boot device LUN number.
Figure 8-16. Edit Boot Settings Menu
o. Return to the Main menu, and select Write under Operation.
p. Select Quit from the driver configuration Main menu to return to the
EFI shell.
q. At the EFI shell, issue the following command to reboot the server:
reset
6. Insert the RHEL 5 installation media into the optical drive on the server. The
RHEL 5 installation process starts automatically, if the server boots from the
optical drive. For information about installing RHEL 5 to boot-from-SAN,
refer to “Installing Software” on page 3-7.
7. Some versions of RHEL 5 require that the adapter drivers be installed on the
server during the installation of the operating system. For information about
installing drivers with the operation system, refer to “Installing Software” on
page 3-7.
8. After the operating system installation is complete, and the server reboots,
type the appropriate key sequence to open the system BIOS/EFI Boot
Manager.
NOTE:
For information about using the QLogic 8100 Series EFI utilities
and driver configuration, refer to “Configuration Settings” on
page 9-4.
Edit Boot Settings
0. Previous Menu
1. Enable Alternate Boot Device [n]
2. Enable Selective Login [n] Y
3. Enable Selective LUN Logins [n] Y
4. OS Mode [Windows/Linux/Other]
5. EFI Variable EFIFCSanLevel [1]
6. Enable World Login [n]