Filter
Top Products
6–Configuring NIC Functionality in the Converged Network Adapter
Configuring the NIC in a Windows Environment
6-20 FE0254601-00 A
11. Configure of the team by assigning a dynamic or static IP address to the
QLogic VT-IM Miniport Driver
logical interface.
The windows command, ipconfig /all, lists the newly created team but
not the physical interfaces in the team. This is because only the logical team
interface is visible to the operating system for all operations, while the
QLogic teaming driver manages the physical interfaces.
Deleting a Team
To delete a team:
1. Start QConvergeConsole CLI by clicking its desktop icon.
2. In the main interactive menu, type 3, and then press ENTER to select
Configure Team Menu.
3. In the Configure Teams Menu, type 4, and then press ENTER to select
Delete Team to display a list of teams from which to choose.
4. Locate the team you want to delete in the list of configured teams. Type the
corresponding number, and then press ENTER (Figure 6-15).
Figure 6-15. Deleting a Team
5. After the system acknowledges that the team has been deleted, press
ENTER to return to the Configure Teams Menu.
NOTE:
Modifying or deleting a network team causes the network connection to be
reset. Do not attempt to configure a team configuration on a production
system.