Q-Logic 8100 SERIES Network Cables User Manual


 
7–Configuring FCoE in a Windows Environment
Boot from SAN
FE0254601-00 A 7-21
i. Press ESC to return to the Configuration Settings menu. Select
Selectable Boot Settings, and then press Enter.
j. Enable the Selectable Boot option in the Selectable Boot Settings
menu. Move the cursor to the Selectable Boot option, and then press
ENTER (Figure 7-8).
Figure 7-8. Selectable Boot Settings Menu
k. Specify the primary boot LUN. Move the cursor to (Primary) Boot Port
Name, Lun option. Type the LUN number, and then press ENTER. The
adapter scans the available devices.
l. Specify the alternate boot LUNs. Move the cursor to the Boot Port
Name, Lun fields, select the device from which to boot in the Select
Fibre Channel Device menu, and then press ENTER. This device is
the LUN that you created on the storage array in Step b.
m. Press ESC twice—the utility prompts you to save the settings.
n. Press ESC to exit the Fast!UTIL BIOS configuration utility.
o. Select Reboot System from the Exit Fast!UTIL menu.
NOTE:
For information about using the QLogic 8100 Series Fast!UTIL
BIOS configuration utility, refer to “Fast!UTIL” on page 9-2.