FE0254601-00 A 7-1
7 Configuring FCoE in a
Windows Environment
Overview
The QLogic 8100 Series Converged Network Adapter is dual-function adapter
comprising FCoE and NIC functions. This section describes the characteristics,
configurations, and features of the FCoE function.
Driver Parameters
Table 7-1 lists the FCoE parameters, their default values, allowed values, and how
to change values. For information about changing parameter values, refer to the
FCoE topics in the QConvergeConsole Help or the Fast!UTIL configuration
options described in “Fast!UTIL” on page 9-2.
Table 7-1. Driver Parameters
Parameter Description Default Range
Configuration
Method
Operation
Mode
The reduced interrupt opera-
tion (ZIO) modes post multi-
ple command completions in
a single interrupt.
0 0, 5, 6
Fast!UTIL, QCon-
vergeConsole GUI,
or QConvergeCon-
sole CLI
Interrupt
Delay Timer
The wait time in 100-micro-
second increments between
accessing (DMA) a set of
handles and generating an
interrupt. Specify a value for
this parameter only when the
Operation Mode setting is 5 or
6. When the Operation Mode
setting is 0, this parameter
should be disabled.
Disabled 0–255
Fast!UTIL, QCon-
vergeConsole GUI,
or QConvergeCon-
sole CLI