Q-Logic 8100 SERIES Network Cables User Manual


 
8–Configuring FCoE in a Linux Environment
Configuring FCoE Parameters Using QLogic Utilities
8-18 FE0254601-00 A
/sys/class/scsi_host
/hostX/
fw_state Firmware state
fw_version FCoE firmware version
isp_id Unused
isp_name QLogic adapter ASIC model number
identifier
max_npiv_vports Maximum number of NPIV ports that are
allowed per physical port
model_desc Full name of the QLogic Converged Net-
work Adapter. For example: QLogic
PCI-Express Dual Channel 10GbE CNA
model_name QLogic Converged Network Adapter
model number
mpi_version MPI (NIC) firmware version
npiv_vports_inuse Number of NPIV ports currently in use
optrom_bios_version BIOS version on the Converged Network
Adapter
optrom_efi_version Converged Network Adapter EFI version
optrom_fcode_version Converged Network Adapter FCode ver-
sion
/sys/class/scsi_host
/hostX/
optrom_fw_version Converged Network Adapter firmware
version
pci_info PCIe negotiated speed and lanes
phy_version PHY firmware version—QLogic 815x
Series Adapters only
proc_name Process name
Scan (w) Scan for adapters
serial_num Not applicable
sg_tablesize Maximum size of the scatter gather list
state (w) Link status and port type
Table 8-6. sysfs FCoE Driver Parameters and File Locations
Sysfs Location Parameters Description