Q-Logic 8100 SERIES Network Cables User Manual


 
6–Configuring NIC Functionality in the Converged Network Adapter
Configuring the NIC in a Linux Environment
FE0254601-00 A 6-39
Figure 6-29 shows that the QLogic 8100 Series Adapter NIC function at PCI
device ID 85:00.0 maps to eth0. QLogic driver parameters can now be displayed
and configured through /sys/class/net/eth0. You can set network interface
options and parameters using commands such as ifconfig and ethtool by querying
with this network id (ethX).
Alternatively, you can create the link between a network interface name ethX and
the physical hardware using the following ethtool command:
ethtool -1 eth0
#ethtool -i ethX