Filter
Top Products
9–Offline Utilities
Fast!UTIL
9-2 FE0254601-00 A
The QLogic Flash programming utility is a DOS utility with command line options.
Fast!UTIL
The Fast!UTIL utility is for offline QLogic 8100 Series Adapters that are installed
on BIOS servers. Fast!UTIL performs the following tasks:
Configures general and advanced adapter settings, selects boot devices,
restores default adapter settings, and displays raw NVRAM data.
Displays information about Fibre Channel devices connected to the adapter.
Verifies disk data and performs low-level disk formatting.
Verifies adapter transmit and receives functions.
Starting Fast!UTIL
To start the Fast!UTIL utility, press CTRL+Q or ALT+Q during the BIOS
initialization after the QLogic 8100 Series Adapter BIOS banner is displayed
(Figure 9-1).
Figure 9-1. Fast!UTIL Startup