Filter
Top Products
6–Configuring NIC Functionality in the Converged Network Adapter
Configuring the NIC in a Windows Environment
6-24 FE0254601-00 A
12. After successfully assigning a VLAN ID to the team or interface, a new
logical interface appears in the Microsoft Windows Network Connections
window as shown in Figure 6-19, and the local area connection for the
teaming logical interface would be disabled.
Figure 6-19. VLAN Local Area Connection Entry
13. Complete the configuration of the VLAN ID assignment by assigning a
dynamic or static IP address to this enabled logical interface. The Windows
command, ipconfig /all, lists the newly created logical interface but not
the physical interfaces and the teaming logical interface. These interfaces
are not listed because the logical team interface is visible to the operating
system for all operations, while the QLogic VLAN/teaming driver manages
the physical interfaces and teaming.
Removing VLAN ID Assignment
To remove VLAN ID assignments from a physical interface or team:
1. Start QConvergeConsole CLI by clicking its desktop icon.
2. In the Main Interactive Menu, type 4,and then press ENTER to select
Configure VLANs Menu.
3. In the Configure VLANs menu, type 4,and then press ENTER to select
Remove VLAN from Port or Team (Figure 6-20).
a. Choose an entry from the list of physical interfaces and teams from
which to remove a VLAN ID assignment.
b. At the prompt, Select ListIndex from the list, type the
number that corresponds to the chosen physical interface or team, and
then press ENTER.
c. At the prompt, Enter VLAN ID (1..4095), type the VLAN ID to be
removed from the physical interface or team, or type All and press
ENTER to remove all VLAN ID assignments.
NOTE:
Creating, modifying, or dissolving network VLANs can cause loss of
connectivity. Do not attempt to configure VLANs on production systems.